4G63 EVO 9 - Intake Cam Sensor Relocation Kit - CAS Relocation
Fixed the exhaust side. Then the intake side became the problem.
After the success of our exhaust cam sensor relocation kit, EVO 9 owners running both sensors ran into a new issue - wire entanglement between the two. So we built the intake cam sensor relocation kit to solve it, rotating the intake sensor 90° for a cleaner install that doesn't fight itself.
The housing was CAD designed on a 3D-scanned Evo 4G63 head and fits perfectly - no filing, no forcing, no workaround.
Machined from 6061 aluminum with T6 heat treatment, this isn't a cast piece that flexes under vibration. It's built to hold its position and outlast the OEM housing it replaces.
OEM seals this with a gasket and RTV that dries out, cracks, and leaks eventually. This one uses two O-rings on the front and back - properly matched, properly sealing, and not something you'll be replacing again in two years.
Comes with a full installation manual, since you'll need to rotate the trigger plate bolted to the cam to match.
Key Features
90° Intake Sensor Rotation Solves wire entanglement when running alongside our exhaust CAS relocation kit.
3D-Scanned OEM Fit CAD designed directly from an EVO 4G63 head for a perfect fit, no modification required.
6061 Aluminum, T6 Heat Treated Built for strength and longevity where cast or plastic housings fail.
Dual O-Ring Sealing No more RTV or gaskets that dry out and leak over time.
Complete Installation Kit Comes with full hardware and instructions - just rotate the trigger plate and install.
What's in the Box
Cam Sensor Relocation Housing
2x O-Rings (Front + Back)
3x Bolts to Close the Cap
1x M6 Bolt to Mount the Cam Sensor
2x M8 Bolts to Mount the Housing to the Cylinder Head
Run both sensors clean. No tangled wires, no leaks, no compromise.
⚙️ Fits Mitsubishi EVO 9 (4G63 engines) - intake-side cam sensor only 📧 For technical questions or custom orders contact sales@ichiban.engineering
